Painting Finished

I put the second coat of exterior paint on today, then left it for about 1/2 hour to get tacky, and proceeded to start removing some of the masking. I started with the interior (since it was fully cured), and re-installed the cabinet doors. The colours are a little off in this photo, because the yellow walls distort the lighting. Also, the pics were taken with my Blackberry rather than my camera, so that doesn't help.

By this point the exterior paint was tacky enough to remove some of its masking, and I was really anxious to see how the galley turned out, so I peeled off all the tape and garbage bags. I think it looks pretty sharp, although there are a couple of spots where I got paint on the stained wood, so those will have to be fixed. I think I'll try using the #000 steel wool and some varsol to remove the paint, and then I'll touch the spots up with a light topcoat of the Polyshades.

People have been asking me what I have left to do, so I made a list. Here it is.

Primed

Its starting to look more like a finished product (or a fried egg) all the time.
Sent from my BlackBerry device on the Rogers Wireless Network

Outside and ready to paint.

Sent from my BlackBerry device on the Rogers Wireless Network

Inside Paint

Well loyal readers, I've been very busy lately and haven't had a chance to give you an update, until now. These photos are actually a couple days old. They show the first coat of interior paint. There is a second coat in now, and I plan to give it a third for good measure. The paint i'm using is Behr Premium Plus or something like that, and it does a fairly good job of covering the stamps on the plywood, which is something I was concerned about.

The walls also have a nice even texture, because prior to painting I spread a layer of wood filler completely over each wall and then sanded it smooth. This smoothed out the deep grain and imperfections (remember, the walls are good-side-out), without resorting to endless hours of sanding.

The colour, chosen by Laura is called "Spiced Butternut." There is a photo of a room with one wall done in the same shade here. I wasn't too keen on it at first, but I have to admit, it's grown on me. Its a very calming colour (or perhaps I'm biased, being a Psych major and all). The square thing on the floor is one of the cupboard doors, to demonstrate the contrast in the shades.

Windows

This is what the windows look like.
Sent from my BlackBerry device on the Rogers Wireless Network

Staining

It's been a few days since my last post, and not because I've stopped working on the trailer, but because the work has been so dull that it really hasn't been worth talking about. It's been a week of wood filler and sanding, and most of the time I looked like a sugar cookie. I've said it before, but I'll reiterate.. I hate finish work. Especially paint prep.

On the bright side though, I finally started staining the galley tonight. I'm using Minwax Polyshades, which is a 2-in-1 stain and polyurethane treatment. For this first coat, I used it like normal stain, painting it on and then wiping it with a rag. This got the colour into the wood, and for the next coat, I won't use the rag. I'll just brush on a thin coat of the product and then leave it to dry. That should give it the nice high gloss, tough finish that is Polyshades' claim to fame.

The photo above really doesn't do the stain justice. I don't know if it was the lighting or what, but the stain looks much better in person than it appears above. Trust me. However, the cabinet door and top drawer did actually turn out a bit lighter shade than the rest of the cabinetry. If I remember correctly, those two pieces were cut from the same sheet of plywood. It seems, for some strange reason, like that particular sheet isn't taking to the stain the same as all the rest. I may need to put an extra coat on those pieces to even them out.

Yes, that is a bit of stain that I dripped on the upper left cabinet sliding door. I'm not worried about it, as the sliding doors will be painted to match the exterior of the trailer (gloss white).

For the cost analysis, I'll add in all the paint supplies now, before I forget how much they were worth. This includes all the sandpaper, varsol, rollers, brushes etc that I got with the paint. Even though it won't all become part of the trailer, I'm adding it in, because almost all of the items are consumable goods. Wayner, I'll leave it up to you whether the full cost of all that stuff should count.

Total Costs to Date:

Last total: $693.22

------------------------------

Paint Supplies: $230

------------------------------

TOTAL: $923

P.S. Someone remind me to take photos of the windows, I just remembered that you all haven't seen them yet.

FML

Sorry loyal readers, but there are no photos for you today. Why you ask? Well, I have reason to believe that my dog ate the micro SD card from my camera. I know it sounds like the old homework excuse, but I’m convinced that’s what happened. I was taking the card out of the camera to upload the photos from yesterday’s trailer work, when Ella the China Shop Bear jumped up and caused me to drop camera, batteries, SD card and all. She then rooted around the rubble with her nose, and as I gathered up all the dropped bits, I found no trace of the memory card. Even if I could find the damn thing after it’s been through her, I’d be surprised if it’s still functional. Not that I’d be that picky about using an 8GB turd to store my photos.

Anyway, down to business. Just because there are no photos doesn’t deny your right to kill time at work reading about my current obsession.

Saturday I didn’t get much done, I built a box to cover the cooler drawer slides where they stick into the cabin, and caulked some of the gaps in the cabin walls. Most of the day was spent retrieving an amazingly complete ’46 Chev 2-ton from a farmer in Hamiota. Dwayne can’t get over what great shape it’s in, and can’t wait to try and make it run. Prior to that though, I finally caved and went with Peter’s (my girlfriend’s father) suggestion to not muck about with fancy fiberglass and boat paint, and just use a good exterior paint. I believe it was CIL brand oil based high gloss exterior paint. Laura picked out the interior colours. The cabin will be painted a sort of cornmeal yellow, and the cabinets will be stained a dark shade, similar to the shade of the laminate countertop. I went with Minwax Polyshades (I think that’s the correct name), which is a 2-in-1 stain and polyurethane treatment. I’ve never used anything like that before, but we’ll see how it goes.

Sunday was another slow day, but I got a bit more done. I started paint prep by getting the wood filler into all the holes on the exterior.
I also scored some windows from a friend of Dwaynes. I wanted to install some small windows that would slide or pop open, but I couldn’t find any. These are a very good compromise. They are hexagonal van windows (a la 1970’s shaggin wagon) about 13” across. When I got them they had a dice design on them (see above, and use your imagination because they were much more symmetrical looking than that) , but that was easily removed by spraying them with engine degreaser, scraping the paint off with the edge of a hose clamp (couldn’t find a razor), and then buffing with a powerball and some glass cleaner. I then installed these in the doors, centered, with the points heading front-to-back, and the flat sides top and bottom. The bottom edges are in line with the door handles.

I also put a ¼-round front lip on the cooler drawer with the round edge facing out.